Remove all loose particles and clean surface. Cut damage edges straight down with the Edge Planer.
Pre-colour damage in the substrate with Colour Touch-Up and the Red Marten Brush.
Choose several colour shades of Hard Wax corresponding to the surface (light/medium/dark) and hold wax sticks in turns to the hot tip of the Hot Knife. Let colour wax mixture flow into the damage in the direction of the grain.
Remove surplus wax with the Special Fillers Applicator. Note: Sharp grooves on the flat area, rounded grooves at edges.
If necessary, grain pattern can be restored by means of an upholstery needle / Special Scraper. For colour adjustment and imitation of the grain, use Colour Touch-Up.
Seal filled damage by misting with Special Repair Lacquer PLUS from a distance of 30-40 cm – do not spray too wet.