Tools and Auxiliaries for the Repair

To process Soft Wax, Hard Wax, Hard Wax PLUS and Ceramic Filler. For melting, moulding and colour-mixing.

A stationary electric tool for continuous operation serving the same range of use as the Hot Knife. Easy to use due to temperature setting adjusted to the individual filler material.

Ideal tool for the processing of filler materials. Soft Wax can be applied and levelled with ease. Projectings of Hard Wax and Hard Wax PLUS can easily be planed off - without scratching the surrounding area. Final filler residue can be removed with the integrated fleece. Thanks to an improved groove direction, the treatment of 90 degree inner edges is also possible.

With this combination tool (Special Fillers Applicator with mini Metal Planer blade) levelling of all König fillers is possible. And furthermore, 90 degree inner edges can be treated not only with the blade of the Metal Planer but also, thanks to an altered groove direction, with the body of the Special Fillers Applicator.

A precision tool for the gentle levelling of all solid König fillers. It is also an effective tool to remove imperfections in the finish like runs and sags. Precise working possible without scratching the surrounding area.

To cut off damage edges on reproductions. The rounded side of the Edge Planer is used to level damage edges on solid wood and veneer.

To strip off filler residues and to remove finish imperfections. The blade made of high-quality steel excels in hard and already sharpened cutting edges. The Special Scraper ‘small‘ has especially been developed to strip off scratches in areas which are difficult to access like e.g. already fitted PVC-windows.

To mix Rex-Lith with hardener. To apply AQUA Wood Filler.

To mix Polyester Filling Lacquer with hardener. Supply unit: 20 pcs.

To restore the grain texture in areas where Soft or Hard Wax has flattened the natural contours of the grain. For the gentle cleaning of the Metal Planer blade.

The economical alternative to the Red Marten Brush. Available: 6 sizes (429 001 - 006) and a set of 3 sizes (429 123).

A handy mixing palette with a solvent-resistant surface and drilling holes for a safe stand of mixing cups and brushes.

For the practical dosing and for the mixing of Polyester Filling Lacquer. Volume: 40 ml.

For the precise extracting/dosing of touch-up dyes and to refill Felt Touch-Up Dye Pens.

A transparent solvent-resistant foil with a variety of possibilities for use like e.g. mixing colours over a surface, processing Rex-Lith, especially on edges.

Different spray nozzles for different kinds of lacquer and other aerosols and their diverse application fields. The spray handle is recommended for use during longer periods of spraying work and for spraying on large areas.

White sanding side: To dull shiny patches e.g. after the filling with Hard Wax and Hard Wax PLUS. To clean plastic and lacquered wood surfaces. To remove spray mist and to adjust gloss sheen deviations. Green polishing side: To create quickly a gloss sheen on matt surfaces without damaging the surrounding area, e.g. with too matt appearing spray lacquers in the edge sector.

To remove filler residues with a light sanding effect and to dull shiny spots. Grit: 1500.

For finest lacquer sanding, to tone down a heavy application of touch-up products and for the gentle cleaning of the heater tips (Hot Knife and Electric Heater). Extra fine, long-fibrous and manufactured without oil.

For the sanding of wood and plastic surfaces. Available in different grit sizes. For an optimal preparation of the surface prior to varnishing and painting.

For the sanding of varnished surfaces and metal. Available in different grit sizes. For an optimal preparation of the surface prior to varnishing and polishing.

Sandpaper assortment for sanding different kinds of surfaces: dry sandpaper for wood and plastics, wet sandpaper for metal and varnished surfaces.

To polish out fine scratches on all varnished surfaces, acrylic/perspex, polyester, Hard-PVC, brass and aluminium. Excellent results on high-gloss surfaces. The micro sanding crystals embedded in a latex layer ensure finest sanding results.  Application of wet sanding method. The sanding paper can be washed out and re-used for at least 20 times.

For use with Micro Sanding Paper. Ideal for PVC-profiles. Adapts to the slightly convex surface of the profile.

420 000: To strip off filler residues without cloth (1,500 grit abrasive lining).

To polish out fine sanding streaks and abrasions on high-gloss surfaces. Produced on water-base – does not leave any residue.

Highly absorbent, lint free and tearproof textile cloths. Indispensable for all cleaning, sanding and polishing work. Very gentle to high-gloss surfaces.

For the thinning of all König NC- and acrylic lacquers, for the glazing adjustment of Colour Touch-Up, and to dissolve the paint chips in the Touch-Up Paint Box. Can be used as brush cleaner. Produced on solvent base.

To degrease the surface prior to a repair. For the gentle removal of filler residues.

For the thinning of all König AQUA lacquers and for the glazing adjustment of AQUA Colour Touch-Up. Maximum addition: 5%. Also to be used to clean tools.

To remove filler residues in combination with Liquid Sandpaper and the Felt Pad. For all cleaning and maintenance work. Cotton texture, washed - lint free, highly absorbent.